[Ntop] Ntop Digest, Vol 73, Issue 5
Grant Pasley
grant at xtranetsa.com
Sun Jun 6 10:49:44 CEST 2010
Thanks Garry - that is sorted and the ./autogen.sh script runs with no
errors, when I try to make I am getting another error, and google doesn't
have much info on this one - has anyone experienced / resolved this yet:
/usr/bin/ld: cannot find -lrrd_th
collect2: ld returned 1 exit status
make[2]: *** [libntop.la] Error 1
make[2]: Leaving directory `/home/ntop-3.4-pre3'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/ntop-3.4-pre3'
make: *** [all] Error 2
Kind regards
Grant Pasley
Xtranet Internet Services
office: 0861 555 666
voip: 087 150 0900
fax: 0866 882 528
cell: 083 304 4450
www.xtranet.co.za
-----Original Message-----
From: ntop-bounces at listgateway.unipi.it
[mailto:ntop-bounces at listgateway.unipi.it] On Behalf Of
ntop-request at listgateway.unipi.it
Sent: Sunday, June 06, 2010 1:47 AM
To: ntop at listgateway.unipi.it
Subject: Ntop Digest, Vol 73, Issue 5
Send Ntop mailing list submissions to
ntop at listgateway.unipi.it
To subscribe or unsubscribe via the World Wide Web, visit
http://listgateway.unipi.it/mailman/listinfo/ntop
or, via email, send a message with subject or body 'help' to
ntop-request at listgateway.unipi.it
You can reach the person managing the list at
ntop-owner at listgateway.unipi.it
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ntop digest..."
Today's Topics:
1. ntop-3.4-pre3 (Grant Pasley)
2. Re: ntop-3.4-pre3 (Gary Gatten)
3. problems with ntop, dies every 5 mins or so. (Tomas Larsson)
4. problems with ntop, dies every 5 mins or so. (Tomas Larsson)
----------------------------------------------------------------------
Message: 1
Date: Sat, 5 Jun 2010 14:28:03 +0200
From: "Grant Pasley" <grant at xtranetsa.com>
To: <ntop at listgateway.unipi.it>
Subject: [Ntop] ntop-3.4-pre3
Message-ID: <027d01cb04aa$8d36a070$a7a3e150$@com>
Content-Type: text/plain; charset="us-ascii"
Hi All,
I am trying to install ntop-3.4-pre3 on centos 5.4, I have libcap installed
but still get the following error when running ./autogen.sh - If anyone has
encountered and resolved this issue please could you advise - thanks.
checking for pcap_lookupdev in -lpcap... no
*** FATAL ERROR ***
It looks that you don't have the libpcap distribution installed.
Download, compile and, optionally, install it.
When finished please re-run this program.
You can download the latest source tarball at http://www.tcpdump.org/
configure: error: The LBL Packet Capture Library, libpcap, was not found!
Kind regards
Grant Pasley
Xtranet Internet Services
office: 0861 555 666
voip: 087 150 0900
fax: 0866 882 528
cell: 083 304 4450
<http://www.xtranet.co.za/> www.xtranet.co.za
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://listgateway.unipi.it/pipermail/ntop/attachments/20100605/2685f177/at
tachment-0001.htm>
------------------------------
Message: 2
Date: Sat, 5 Jun 2010 08:41:08 -0500
From: Gary Gatten <Ggatten at waddell.com>
To: "'ntop at unipi.it'" <ntop at unipi.it>
Subject: Re: [Ntop] ntop-3.4-pre3
Message-ID:
<D9B37353831173459FDAA836D3B434994BEED95C at WADPMBXV0.waddell.com>
Content-Type: text/plain; charset="utf-8"
You MAY need the development package of libpcap. Also, check the configure
options and see if you can specify the location of libpcap.
________________________________
From: ntop-bounces at listgateway.unipi.it <ntop-bounces at listgateway.unipi.it>
To: ntop at listgateway.unipi.it <ntop at listgateway.unipi.it>
Sent: Sat Jun 05 07:28:03 2010
Subject: [Ntop] ntop-3.4-pre3
Hi All,
I am trying to install ntop-3.4-pre3 on centos 5.4, I have libcap installed
but still get the following error when running ./autogen.sh ? If anyone has
encountered and resolved this issue please could you advise ? thanks.
checking for pcap_lookupdev in -lpcap... no
*** FATAL ERROR ***
It looks that you don't have the libpcap distribution installed.
Download, compile and, optionally, install it.
When finished please re-run this program.
You can download the latest source tarball at http://www.tcpdump.org/
configure: error: The LBL Packet Capture Library, libpcap, was not found!
Kind regards
Grant Pasley
Xtranet Internet Services
office: 0861 555 666
voip: 087 150 0900
fax: 0866 882 528
cell: 083 304 4450
www.xtranet.co.za<http://www.xtranet.co.za/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://listgateway.unipi.it/pipermail/ntop/attachments/20100605/4ff65fec/at
tachment-0001.htm>
------------------------------
Message: 3
Date: Sun, 6 Jun 2010 00:41:15 +0200
From: "Tomas Larsson" <tomas at tlec.se>
To: <ntop at listgateway.unipi.it>
Subject: [Ntop] problems with ntop, dies every 5 mins or so.
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAAGE4UvMgtwJIpJJKF65P6VPCgAAAEAAAAEu4WKRjoztKq2EM0swf
AYYBAAAAAA==@tlec.se>
Content-Type: text/plain; charset="US-ASCII"
Having some sort of problems.
nTop dies after a while, here is the output from "messages"
Jun 6 00:10:54 BLATUNGA ntop[18398]: Resetting traffic statistics for
device eth0
Jun 6 00:10:54 BLATUNGA ntop[18398]: Initializing device eth0 (0)
Jun 6 00:10:54 BLATUNGA ntop[18398]: DLT: Device 0 [eth0] is 1, mtu 1514,
header 14
Jun 6 00:10:54 BLATUNGA ntop[18399]: Listening on [eth0,eth1]
Jun 6 00:10:54 BLATUNGA ntop[18399]: Note: Reporting device initally set
to 0 [eth0]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread starting [p18399]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(1):
Started thread for network packet sniffing [eth0]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread running [p18399]
Jun 6 00:10:58 BLATUNGA kernel: device eth0 left promiscuous mode Jun 6
00:11:35 BLATUNGA kernel: eth0: Promiscuous mode enabled.
Jun 6 00:11:35 BLATUNGA kernel: device eth0 entered promiscuous mode
Jun 6 00:11:35 BLATUNGA ntop[18471]: Checking eth0 for additional devices
Jun 6 00:11:35 BLATUNGA ntop[18471]: Resetting traffic statistics for
device eth0
Jun 6 00:11:35 BLATUNGA ntop[18471]: Initializing device eth0 (0)
Jun 6 00:11:35 BLATUNGA ntop[18471]: DLT: Device 0 [eth0] is 1, mtu 1514,
header 14
Jun 6 00:11:36 BLATUNGA ntop[18472]: Listening on [eth0,eth1]
Jun 6 00:11:36 BLATUNGA ntop[18472]: Note: Reporting device initally set
to 0 [eth0]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread starting [p18472]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(1):
Started thread for network packet sniffing [eth0]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread running [p18472]
As you can see, no obvious reasons.
Running CENTOS 5.3 and ntop 3.3.8-2.el5.rf, from dag-vieers
With Best regards
Tomas Larsson
Sweden
www.ebaman.com
------------------------------
Message: 4
Date: Sun, 6 Jun 2010 00:24:43 +0200
From: "Tomas Larsson" <tomas at tlec.se>
To: <ntop at ntop.org>
Subject: [Ntop] problems with ntop, dies every 5 mins or so.
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAAGE4UvMgtwJIpJJKF65P6VPCgAAAEAAAAFKRn+TDEm1NoK09CASX
qsIBAAAAAA==@tlec.se>
Content-Type: text/plain; charset="US-ASCII"
Having some sort of problems.
nTop dies after a while, here is the output from "messages"
Jun 6 00:10:54 BLATUNGA ntop[18398]: Resetting traffic statistics for
device eth0
Jun 6 00:10:54 BLATUNGA ntop[18398]: Initializing device eth0 (0)
Jun 6 00:10:54 BLATUNGA ntop[18398]: DLT: Device 0 [eth0] is 1, mtu 1514,
header 14
Jun 6 00:10:54 BLATUNGA ntop[18399]: Listening on [eth0,eth1]
Jun 6 00:10:54 BLATUNGA ntop[18399]: Note: Reporting device initally set
to 0 [eth0]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread starting [p18399]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(1):
Started thread for network packet sniffing [eth0]
Jun 6 00:10:54 BLATUNGA ntop[18399]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread running [p18399]
Jun 6 00:10:58 BLATUNGA kernel: device eth0 left promiscuous mode
Jun 6 00:11:35 BLATUNGA kernel: eth0: Promiscuous mode enabled.
Jun 6 00:11:35 BLATUNGA kernel: device eth0 entered promiscuous mode
Jun 6 00:11:35 BLATUNGA ntop[18471]: Checking eth0 for additional devices
Jun 6 00:11:35 BLATUNGA ntop[18471]: Resetting traffic statistics for
device eth0
Jun 6 00:11:35 BLATUNGA ntop[18471]: Initializing device eth0 (0)
Jun 6 00:11:35 BLATUNGA ntop[18471]: DLT: Device 0 [eth0] is 1, mtu 1514,
header 14
Jun 6 00:11:36 BLATUNGA ntop[18472]: Listening on [eth0,eth1]
Jun 6 00:11:36 BLATUNGA ntop[18472]: Note: Reporting device initally set
to 0 [eth0]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread starting [p18472]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(1):
Started thread for network packet sniffing [eth0]
Jun 6 00:11:36 BLATUNGA ntop[18472]: THREADMGMT[t2964315024]: NPS(eth0):
pcapDispatch thread running [p18472]
As you can see, no obvious reasons.
Running CENTOS 5.3 and ntop 3.3.8-2.el5.rf, from dag-vieers
With Best regards
Tomas Larsson
Sweden
www.ebaman.com
------------------------------
_______________________________________________
Ntop mailing list
Ntop at listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
End of Ntop Digest, Vol 73, Issue 5
***********************************
More information about the Ntop
mailing list